With the spread of security knowledge, the number of users using electronic fences has increased. Therefore, it is inevitable that some products because of the installation is not in place or the details do not pay attention to the product anti-theft alarm function does not meet the expectations of the ideal, here on this issue is simple to tell you about.
The first is the analysis of the precautions during installation. In general, the following points need to be noted:
1. Do not use the system around flammable or explosive materials. When using it in special circumstances, keep the safety distance;
2, the host can not be installed in a humid, high or low temperature environment;
3, do not install in thunderstorm days;
4. The main chassis is installed at a height that is easy to maintain and maintain;
5. Whether there is a strong interference source (such as a transmitting station or other high-frequency equipment) near the installation location of the fence device, and if so, the signal line must be marked with a shielded twisted pair cable in the construction drawing;
6. Once an abnormal situation occurs in this product, it is necessary to cut off the power supply first, and notify the professional installation or maintenance personnel, and do not repair it by yourself;
7. The users of this product must have the knowledge of electrical safety and touch electrolysis, and must be professionally trained to be familiar with the correct use of this product.
Followed by the angle of the installation process. There are four types of installation angles for electronic fences: inward tilting, outward tilting, vertical or horizontal mounting. As for the specific application, the method is mainly determined according to the specific circumstances. Here is a simple introduction to the perspective of the installation of the perimeter fence in the next week.
1, according to the protection of objects: to prevent external intrusion is recommended for the installation, prevent the internal overturning is recommended for the inward tilt
2. According to the environment of the perimeter: Suggestions for inward inclination or vertical installation near residential areas and schools, and those in empty areas are recommended to be cambered. If the fence is higher than 2.5 meters, it can be installed horizontally.
3. According to the site conditions and Party A's requirements, determine the perimeter fence angles (0°, 22.5°, 45°, 67.5°, 90°, 112.5°, 135°, 157.5°, 180°) and tilt direction (introverted, Extraverting, vertical or horizontal mounting).
The first is the analysis of the precautions during installation. In general, the following points need to be noted:
1. Do not use the system around flammable or explosive materials. When using it in special circumstances, keep the safety distance;
2, the host can not be installed in a humid, high or low temperature environment;
3, do not install in thunderstorm days;
4. The main chassis is installed at a height that is easy to maintain and maintain;
5. Whether there is a strong interference source (such as a transmitting station or other high-frequency equipment) near the installation location of the fence device, and if so, the signal line must be marked with a shielded twisted pair cable in the construction drawing;
6. Once an abnormal situation occurs in this product, it is necessary to cut off the power supply first, and notify the professional installation or maintenance personnel, and do not repair it by yourself;
7. The users of this product must have the knowledge of electrical safety and touch electrolysis, and must be professionally trained to be familiar with the correct use of this product.
Followed by the angle of the installation process. There are four types of installation angles for electronic fences: inward tilting, outward tilting, vertical or horizontal mounting. As for the specific application, the method is mainly determined according to the specific circumstances. Here is a simple introduction to the perspective of the installation of the perimeter fence in the next week.
1, according to the protection of objects: to prevent external intrusion is recommended for the installation, prevent the internal overturning is recommended for the inward tilt
2. According to the environment of the perimeter: Suggestions for inward inclination or vertical installation near residential areas and schools, and those in empty areas are recommended to be cambered. If the fence is higher than 2.5 meters, it can be installed horizontally.
3. According to the site conditions and Party A's requirements, determine the perimeter fence angles (0°, 22.5°, 45°, 67.5°, 90°, 112.5°, 135°, 157.5°, 180°) and tilt direction (introverted, Extraverting, vertical or horizontal mounting).
Retractable Fiberglass Measure Tape,ABS Case Fiberglass Tape Measure,Retractable ABS Fiberglass Meaure Tape
HENAN BONTHE MEASURING TOOLS. CO., LTD , https://www.tapemeasurebte.com