According to the specific use of the floor mat combined with the characteristics of the material of the pad, instead of listening to the introduction of the guide, I will buy a mat that is not suitable for home.
In general, the floor mats used in the interior are mainly made of acrylic, cotton, and microfiber. They are used for outdoor floor mats. The material selection should be rubber flocking, coconut fiber and other synthetic fiber materials. the Lord. According to the division of each room, the specific explanation is as follows:
1. The doorway. The floor mats used here are mainly for sanding, decontamination, and preventing dust from being brought into the room to cause pollution. Therefore, it is necessary to use foot pads made of materials with good decontamination effect, wear resistance and easy cleaning, such as rubber, coconut fiber, polypropylene, nylon, polyester and so on.
2. Entrance. The floor mats here protect the floor and reduce the wear on the floor. Therefore, you can choose a pad of acrylic material that is soft and not easy to shed.
3. The bathroom. Place the floor mats in front of the wash basin and at the door of the bathroom, mainly to absorb water. Therefore, cotton or microfiber mats should be selected, especially microfiber materials. Consumers step on it directly after bathing, not only absorb water quickly, but also feel very comfortable.
4. Kitchen. The floor mat is used here to block the water and oil in the kitchen from entering the living area. It is recommended to use cotton mats here. Because the cotton floor mat absorbs oil well, and because it is a natural material, it is safer to use in the kitchen. In addition, cotton mats are mostly dark, not obvious after soiling, and cleaning is relatively simple. Cotton floor mats also have a prominent advantage, that is, the price is low, the same is the natural material of microfiber material mat, the price is about 1.5 times. Use cotton mats in the dirty environment of the kitchen, even if you change them often, you won't feel heartache.
5. Bedroom. Nowadays, many people like to put a mat on the side of the bed, and when they get out of bed, they can barefoot and not catch cold. Although there are many material bedside mats on the market, Peng recommends that you use cotton or microfiber mats in your bedroom. These two mat materials are safe and non-polluting, completely eliminating static electricity and comfortable, making them ideal for bedrooms and children's rooms.
6. Balcony, stairway. The floor mats mainly play an anti-slip effect in these two places. Acrylic materials and non-slip mats can be used.
After determining the type of floor mat, it is also very problematic to choose what kind of suit. There are dozens of floor mats that reporters see in the store, which is dazzling. Experts suggest that the quality of the mat material and whether it meets the needs of use is the primary concern that everyone should care about. As for the color of the flower, there is no fixed rule, as long as it matches the overall decoration style in the home. However, it should be reminded that it is best to avoid buying a monochromatic floor mat, because the dirt will fall on the floor mat and it will be very prominent and affect the appearance. As for the size of the floor mat, this depends on actual needs. Under normal circumstances, ordinary door selection, 40 × 60, 50 × 80, 60 × 90 (cm); bedside, porch selection, 50 × 150, 85 × 115 (cm).
In general, mats made of high-quality fiber composite materials are treated with anti-static treatment, but some products with poor quality are difficult to ensure that no static electricity is generated. Therefore, when purchasing, you should not be cheap, you should go to the regular store to buy.
REDUCER Type welded/seamless CON REDUCER ECC REDUCER
Standard: ASME/ANSI B16.9 ANSI/ASME B16.11 ANSI/ASME B16.28
BSEN10253-2 BS EN10253-4
Size:1/2''~48''(Seamless); 16''~80''(Welded)
Wall thickness: Sch5~Sch160\XXS
Manufacturing process: Hot Extruded , cold extruded ,pressed , etc.
Material:
Carbon steel:
FSGP PG370W PT370
.ASTM / ASME A234: WPB - WPC - WP1WP11 - WP12 - WP5 - WP22 - - WP91
ASTM / ASME A/SA 420: WPL6 - WPL3EN 10216-2: P195GH - P235GH - P265GH-P355Nh
20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV6310CrMo5-5 - 13CrMo4-5 - 10CrMo9-10-15NiCuMoNb5-6-4 - X11CrMo5X11CrMo9-1 - X10CrMoVNb9-1X10CrWMoVNb9-2 - X20CrMoV11-1former BS-DIN-AFNOR equivalent grades)
HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE FITTINGS
ASTM A860 / MSS-SP75: WPHY 42WPHY 46 - WPHY 52 - WPHY 60-WPHY 65 - WPHY 70 grades
WPHY 80 only as per MSS-SP75 EN 10208-2: L245NB - L290NBL360NB - L415NB - L360QBL415QB - L450QB - L485QB - L555Q
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;
ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65;
ASTM A420 WPL3/WPL6/WPL9;
Duplex steel
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
All reducers, either eccentric or concentric, decreasethe effective size of the pipe. With smaller crosssectional area there is increased frictional resistanceto the flowing material and an increase systempressure.The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to
manufacture than the concentric reducer and costs more. One advantage over the concentric reducer is that can
be hung or suspended flush against a flat ceilling or wall. This lends greater support to the piping system and many times reduces the required space. When used in horizontal piping systems with the straight
side up, it acts as a trap for foreign material. When installed straight side down, it prevents trapping of foreign material.
The concentric reducer is made with both inlet and outlet on a common center line. This reducer is less ostly t manufacture than the eccentric typeand is adaptable to most piping installations.
Pipe Reducer,Concentric Reducer,Stainless Steel Pipe Reducer,Reducer Pipe
HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com