To ensure a stable DC24V power supply, it is essential to use a reliable and consistent power source. When operating the Schmidt tension gauge, the tension bar should ideally be positioned horizontally, with a maximum tilt of 15 degrees for optimal performance.
**Schmidt Tension Gauge Maintenance and Precautions**
Proper maintenance and careful handling are crucial to ensure accurate readings and long-term functionality of the Schmidt tension gauge. Avoid applying any extra pressure or impact on the shaft that connects the tension rod, as this can damage the high-precision sensor, leading to inaccurate measurements and potential malfunctions.
Do not attempt to adjust the three adjustable resistors located on the circuit board, as this may affect the device's calibration and performance. Avoid frequently plugging or unplugging the power connector, as this can cause wear and tear over time.
It is recommended to store the device in a dry environment to prevent moisture-related damage. When installing the knob, avoid excessive use, as this could compromise the firmness of the insert.
Never drop the device, as it may cause damage to internal ceramic components or the casing. When installing the tension rod, make sure the locking screw aligns properly with the shaft’s plane to ensure secure mounting.
Only use the device with compatible wiring. Do not add any grease to the damper wheel, as this may interfere with its operation. Unauthorized disassembly of the self-adjustment mechanism is strictly prohibited.
Regularly replace the wool ring to prevent clogging of the nozzle. If the reel becomes abnormal or does not rotate smoothly, replace it promptly, as worn-out bearings may be the cause. If the damper wheel slips or rotates unevenly, clean the O-ring using a cotton swab dipped in alcohol to remove any buildup and ensure smooth operation.
Keep the production area clean to minimize dust accumulation, which can accelerate wear on the tensioner components.
For more information, visit our website: http://www.humin.com
Source: http://news.chinawj.com.cn
Editor: Hardware Business Network Information Center | http://news.chinawj.com.cn
(Word count: 513)
Editor: Hardware Business Network Information Center | http://news.chinawj.com.cn
(Word count: 513)Analog Conductivity Controller
An online conductivity controller (transmitter) is an automated device that monitors and controls liquid conductivity in real time. Its core function is to continuously collect liquid conductivity data and, in combination with preset parameters, implement a closed-loop control process of "monitoring-judgment-execution." It is widely used in scenarios requiring precise management of liquid purity, ion concentration, or component ratios. The analog conductivity controller can be connected with the analog conductivity sensors to realize the measurement of water conductivity values.
Â
Advantages:
1. The conductivity controller can not only display the conductivity value, but also display the resistivity, TDS and salinity value.
2. Two 4-20mA current output and some models support RS485.
3. Different models are compatible with conductivity sensors of different ranges, enabling conductivity monitoring from ultrapure water to pure water, surface water to acid and alkali concentrations.
Â
Matched conductivity sensors suggestion
ASC100, ASC200, ASC300, ASC400
Â
Â
Conductivity Controller,Conductivity Transmitter
Suzhou Delfino Environmental Technology Co., Ltd. , https://www.daruifuno.com