I. Product Introduction
SC757E2 type giant electro-hydraulic multi-function pliers are AC, DC dual-purpose electric rescue tools, no external power source and tubing, each tool can be operated by pressing a switch, no need to consider the power source can drive the number of tools, shorten Rescue time is an ideal tool for quick rescue. Single operation, the use of LUKAS unique star-shaped manual valve operation is more convenient and safe.
The whole set of tools does not require a power pump set and hydraulic hose. Two power supply methods are used. The 220V AC power supply and the 25.2V DC power supply can be quickly replaced. The two are installed in the same position. The tool is equipped with LED lights for nighttime lighting. The LED lamp and the hydraulic system share the same power supply, and no additional battery is required. The LED lamp in the work area can also illuminate. The device uses a lithium battery. When the battery is used, the continuous operation time is ≥ 60 minutes and the lithium battery capacity is 5.0 Ah . The battery charge display function allows the battery to retain ≥ 75% after nine months of storage when the battery is fully charged .
Second, product characteristics
1 is the current maximum expansion force, shear force, pulling force multi-function forceps;
2 is the perfect tool for urban rescue, road traffic rescue and disaster relief;
3 Removable expansion head, bigger and more effective shear force;
4 The "shark-toothed" expansion head gives it unstoppable gripping force during rescue. Is the largest expansion force, shear force, pulling force of the multifunctional clamp;
5 is the perfect tool for urban rescue, road traffic rescue and disaster relief;
6 Removable expansion head, bigger and more effective shear force;
7 The "shark-toothed" expansion head gives it an unstoppable grip during rescue.
Third, the product parameters
Shear force | 880 kN |
Cut round steel diameter | 38 mm |
Maximum expansion force | 1300 kN |
Expansion force 25mm from the tip | 43 kN |
Expansion distance | 450 mm |
Pulling force | 98 kN |
Pull distance | 302 mm |
Overall size (length * width * height) | 1033 x 294 x 285 mm |
weight | 24 kg |
EN cut level | H |
NFPA cut level | A8/B9/C8/D9/E9 |
waterproof level | IP54 |
Fourth, optional accessories
Germany's LUKAS2014 brand new upgraded second-generation AC/DC dual-use electric rescue tool eDRAULIC2.0 , which combines the practical speed and power of rescue into an exquisite one-piece electrohydraulic tool, eliminating the need for an external power source and tubing. Each tool gently presses the switch. Operable, no need to consider the power source can drive the number of tools, shorten the rescue time, is an ideal tool for rapid rescue;
There are two LED lights at the switch to make night-time rescue more convenient, with a light source at the battery outlet for battery replacement at night. Battery, charger and power supply line between the series eDRAULIC LUKAS all common tools, interchangeable;
High-performance lithium battery power display function, can clearly understand the use of the battery from the outside to facilitate the rescue; the use of power lines can make tool rescue without time limit.
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial Sectional Door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hongfadoor.com