Home decoration when the paint is indispensable, it can be used to paint the walls, windows and doors can also be used to paint, paint brands more and more types of music became eagerly paint, paint Leroy in many paint brands How to use it? Next, follow the decoration home network Xiaobian to learn how to use Lehua paint, the relevant content of the use of Lehua paint!
How to use Lehua paint:
1. Handle the base layer: use a scraper or a glass piece to scrape the surface of the dust, glue, and rust, taking care not to scratch the burrs.
2, the seal primer: panel, line and other decorative materials before the paint brush a varnish, requires uniform brushing, can not leak brush.
3, frosted paper: the polishing layer is polished, polished along the wood grain, first grind the line and grind four planes.
4, oil powder: use cotton silk 蘸 oil powder repeatedly rubbed on the surface of the wood, rub the oil powder into the brown eye, and then wipe with burlap or wood, the remaining powder on the corner of the line with bamboo. After the oil powder has dried out, use a No. 1 sandpaper to polish the wood grain lightly and smooth it down. Protect the edges and corners.
5, the base layer coloring, repair: the base layer coloring of the finish is determined according to the paint color specified by the sample, and is prepared by using clear oil varnish, the oil is not too thin, and it is suitable to adjust the porridge shape. Rubbing the head with a length of about 20~40cm, including the edges and corners, etc.
6, full batch of color putty: the color should be shallower than the sample 1-2, the size of the putty oil is suitable. Use a knife to scrape the putty into the nail hole, crack, etc., when squeezing the putty, slant it up, the putty should be scraped, leaving no putty. After the putty has dried out, use a No. 1 sandpaper to gently sand the grain, and grind it to a smooth, damp cloth to wipe the dust.
7. Grinding: The base layer of the finish is colored and the putty is leveled and smoothed with water sandpaper. After grinding, clean it with a cloth. Then use the same color putty to scrape the second time, and ask to be the same as the putty. After scraping, use the same color putty to fill the nails and the corners of the missing edges, and ask for a smooth and smooth shaving. Dry the matte paper and smooth it. Make the wood grain clear, do not wear the edges and corners, clean it after polishing, wipe it with a damp cloth, and dry it.
8, brush oil color: brushing action should be fast, smooth wood grain brushing, brushing, oil management should be brisk, can not leave joint brush marks, each brush surface should be brushed once, can not leave a joint, painted After brushing, the color is the same, the wood grain is not covered, and the brushing procedure is the same as the brush lead oil.
9. Brush the first varnish: the brush method is the same as the brush oil, and the old brush that has been ground out should be used. After the paint has dried out, use a No. 1 old sandpaper to thoroughly polish it, and then thoroughly rub off the top of the paint, then wipe it with a damp cloth.
10, make up the putty: use the horny greasy board, wait for the color putty to be scraped clean, smooth, no putty scars, can not damage the paint film.
11, repair: the surface of the black spots, thrift, putty and material color inconsistency into a color, and draw wood grain.
12. Scrub paper: Use a fine gauze paper to gently rub back and forth, and then wipe the powder with a damp cloth.
13, brush the second and third varnish: the surrounding environment should be neat, the same brush with the first varnish, but the action should be agile, more brushy and more rational, brush full, no flow, no light, even light. After the paint is applied, the paint is dried and then wiped clean with a damp cloth. Then brush a paint, then polish it with water sandpaper, smooth it, wipe it after grinding, repeat it three times, and ask for the uniform thickness of the paint film, and the angle and the corner of the corner are polished in place.
14. Afterwards, you need to brush the top coat as required.
The above is how to use Lehua paint, the detailed answer to the use of Lehua paint, I do not know if you are satisfied with the introduction of the decoration home network Xiaobian. If you want to know more about the exciting content, please continue to pay attention to our home encyclopedia!
More related wonderful reading:
What are the paint characteristics of Akzo Nobel paint?
How to remove the paint? What are the methods of paint removal?
How about bauhinia paint? Bauhinia Paint Price Introduction
How to wash the paint? Paint cleaning precautions
DAYUE is a supplier to the oil and gas industries, where the durability of hard metal products makes them suitable to use in the hostile subsea engineering environment. Tungsten carbide is used to manufacture extremely hardwearing components such as control valves, liners and bearing housings for use in exploration and flow control applications.
The specialised products and components we make for oil and gas sector include:
Control Valve Assemblies and Flow Trim components
Plugs, Seats and Cages
Disc Stack Assemblies
Centrifuge Tile Assemblies
Wear Sleeves and Inserts
Bearings, Bushes, Guides and Sleeves
Mechanical Seal Rings
Piston and Valve bodies
Ball Valve Seats
Stabiliser Inserts
Choke Beans
Plungers
Weights
We use our specialist manufacturing facilities to make these hard metal products in house. In particular, we provide
Automatic pressing, isostatic pressing and custom shaping from pre-sintered blocks
Individual sizes up to 260mm (11 inch) in diameter and 180kg weight
Cylindrical and flat, sintered or finish ground components and assemblies
Vacuum sintering and sinter HIP to control material composition
We can mechanically retain Tungsten Carbide Components in steel housings by interference fitting, and we have facilities for induction or gas brazing and adhesive bonding.
We produce numerous specialised tungsten carbide wear part components and sub-assemblies for use within oil and gas exploration and control valve industries. Talk to a DAYUE expert about getting a bespoke wear part product to meet your specific application requirements.
Tungsten Carbide Oil & Gas Components
Tungsten Carbide Oil & Gas Components,Tungsten Carbide Centrifuge Tile Assemblies,Tungsten Carbide Wear Sleeves and Inserts,Tungsten Carbide Mechanical Seal Rings
Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com