| Home>Bearing knowledge>Teach you how to identify the true and false FAG bearings |
Teach you how to identify the true and false FAG bearings
Source: China Bearing Network Time: 2018-02-18
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1. Look at the FAG imported bearing logo. Some of the components on the right track are marked with certain marks; such as the symbol of the top of the gear mark, etc.; to ensure that the machine is correctly installed; no one can not be purchased.
2, look at the color of FAG bearings. Some original parts of the appearance specify a certain color; if other colors; then fake and shoddy parts.
3, look at the appearance of FAG bearings. The original parts of the external printing or casting and symbols clearly on the track; and the fake filling products look rough.
4, look at the paint. Unscrupulous traders will simply process the waste parts; such as dismantling, loading, spelling, scraping, painting, etc.; and then selling fake products; illegally obtaining high profits.
5, look at FAG imported bearing texture. The original accessories are selected according to the requirements of the description of the qualified information; fake products are mostly used to sell defective data.
6. Look at the missing. The components of the track are necessary to be completely intact; the ability to ensure smooth installation and normal operation. Some small parts on the assembly are missing; usually “parallel importsâ€; these are difficult for the device. Missing gadgets; forming the entire assembly parts void.
7. Look at the FAG imported bearing storage. If the auto parts are dry cracking, oxidation, discoloration or aging, they may be formed by the poor environment, long storage time and poor data.
8, look at the FAG imported bearing joint. If the clutch plate rivet loose, brake tube degumming, electrical parts joint desoldering, paper filter joints off the surface and other appearance; then can not be used.
9, look at FAG bearing packaging. The original parts packaging is usually compared to the standard; unified standard standards; printed handwriting clearly on the track; and fake filling product packaging printing is inferior; often can easily find the hole from the packaging.
10, look at FAG imported bearing technology. The appearance of defective products is sometimes good, but due to poor manufacturing process; simple presentation of cracks, sand holes, slag inclusions, burrs or bumps. Cylinder head kneading deformation; simple use of the seal is not easy to use And ablation; caused by oil leakage, air leakage and water leakage, the piston and piston ring work has a burr and simple pull cylinder.
Recommend to friends comments close window
| Bearing related knowledge |
| On-line monitoring skills of rolling bearings: iron spectrum analysis method "SKF imported bearings in operation" should pay attention to the problem The basic components of the rolling bearing constitute the common terminology and definition of the rolling bearing bearing gasket INA imported bearings rust corrosion and avoidance methods |
This article links to http://
Please indicate the bearing network http://
Previous:Analysis of the misunderstanding of the replacement of the roller bearing of the novice Next:The new type of copper-iron composite powder for oil bearing
KN95 Face Mask,Disposable KN95 Masks,95% Filtration Mask,KN95 Civil Mask
Ningbo Jiashang textile co., LTD., , https://www.cn-jshang.com