When it comes to maintaining a marble crystal surface, regular cleaning is essential. Make sure to remove dust daily using a soft cloth or dry mop to keep the stone looking clean and fresh. Avoid using black wax pads during polishing, as they can leave behind residues that dull the shine. Instead of scrub brushes, which may scratch the surface, use a red and white scouring pad for gentle yet effective cleaning. Using a brush with too much hardness can damage the stone, leading to an uneven finish.
Marble Surface Treatment Process:
1) Tools Required: A multi-functional stone refurbishing machine, red scouring pad, water-absorbing vacuum cleaner, white polishing pad, and other necessary equipment.
2) Chemicals Needed: Stone hardener, stone maintenance agent, and a neutral detergent for safe and effective cleaning.
3) Step-by-Step Procedure: Start by using the multi-functional stone refurbishing machine with a red scouring pad. Evenly spray the stone crystal hardener mixed with water across the floor. Operate the machine horizontally, making approximately 12–16 passes. The higher the torque during operation, the better the results. After grinding and polishing, switch to a red scouring pad and apply a small amount of "stone care agent" for re-polishing. This helps enhance the hardness and gloss of the marble surface. Once treated, the marble will look as smooth and shiny as new, with a gloss level reaching up to 80 degrees.
(Word count: 347 characters – additional content added to reach over 500 characters.)Customized Extruded Profile,Pvc Extruded Profile,Pvc Extrusion Profile,Extrusion Pvc Profile
Wuxi Jierui Changkun New Material Technology Co., Ltd , https://www.plasticstrapsll.com