When people buy wardrobes, they are not necessarily purchased wardrobes that have already been assembled, but they are also simple to assemble . They are assembled manually. This kind of time will require all of us to carry out assembly work in this area. Xiao Bian will introduce the method and details of the assembly of the wardrobe.
How to install the assembly wardrobe
1. Check the packaging
To receive the goods, the first is to check the packaging and the goods to see if there is any damage, such as whether the steel pipe was crushed. If you have such problems, you must not sign for purchase.
2. Check the accessories
After checking the goods, check the matching accessories, and check the instructions on the installation manual one by one. If there is a slight positive impact on the installation, don't install it later.
3. First installed bottom
At the beginning of the installation, the bottom is installed first, with four high-through connectors, two short tubes in the middle, and two long tubes. When the floor is connected, it can be installed from the bottom up, and then a three-way joint can be mounted on each side.
4. Set of wardrobe cloth
After the bottom and the wardrobe cloth are covered, insert the short holes in the six short steels, and then put the whole wardrobe cloth on it. Then, as in the bottom, install a partition and put on six steel pipes.
5. Install the top steel pipe
In this way, up to the top, because both sides are also installed, just use a long steel pipe to connect it. If the height of the wardrobe is too high, it is recommended to push it to the side and it will be convenient and simple.
Assemble the wardrobe need to pay attention to what details
1. Wardrobe assembly preparation
Simple wardrobe to buy and install, in fact, is very simple, it has instructions and operating drawings, each part has a label number, just put the same number can be put together. Then, according to the order of installation, use the parts one by one and put them all together. However, we must pay attention to classification must be clear, put these well-classified parts are placed, remember not to lose, otherwise it will affect the installation.
2. Early wardrobe assembly
During the installation, it is recommended that the simple closet should be installed face down, from left to right and from right to left. The diagonal error of the installation should not exceed 1mm, otherwise it will be easily damaged when used. Reduce life expectancy.
3, the middle of the wardrobe assembly
When installing, use a horizontal ruler to simply measure the level of the wardrobe. When the wardrobe is horizontal, install the installation order, such as clothes rails, drawers, and door panels.
Xiao Bian summary: Assemble the wardrobe , in short, we must check the various parts and parts, and then classify, and then strictly in accordance with the provisions of the operation to install, only in this way can ensure that the wardrobe assembly does not occur, so that the use of the closet better Longer life.
Formica have a history of hundreds of years, and they launch a large number of popular designs every year, which are loved by designers all over the world.
Sinowolf keeps up with the design trend, and has developed most of the popular designs of Formica. Authoritative certifications such as British ITS, various testing standards, etc., achieve the same color and surface treatment, and provide you with a one-step edge sealing solution!
Sinowolf Plastic Dekor Co., Ltd , http://www.sinowolfdekor.com