What are the characteristics and types of wall tiles?

Wall tiles are an effective way to protect walls from water splashes. They are used not only on walls, but also on the edges of doors and windows. It is also an interesting decorative element. Decorative wall tiles for the baseboard. That is, the appearance of the protective wall base is not easy to be dirty by the shoes or the legs of the table and chair. Tiles for sinks and bathrooms should be aesthetically pleasing, moisture resistant and wear resistant. The wall tiles are highly smooth, and the color patterns available for selection are various and lighter and thinner than the tiles.

The glazed surface guarantees the waterproof performance of the wall tiles and has good anti-pollution ability. Tiles are a wear-resistant, waterproof, aesthetically pleasing and easy to clean material. Because the requirements for wear resistance are not as strict as the tiles, the variety of choices is more abundant. Ceramic wall tiles have low water absorption and strong resistance to corrosion and aging. In particular, its special moisture-proof, scrub-resistant and weather-resistant properties cannot be replaced by other materials. Its low price and rich color make it an ideal decoration material for kitchen, bathroom and balcony walls in home decoration.

Artistic texture wall tiles
Decorative bricks for wall decoration can be divided into two categories.

First, glazed tiles
The surface of the brick is coated with a colored glaze, which is processed and fired. The color changes are rich, and it is especially easy to clean and maintain. It is mainly used for wall decoration of kitchen and bathroom.

1. Glazed interior wall tiles.

Commonly known as ceramic tile, it is called glazed brick because it has a layer of glaze on the surface of the fine pottery. The glazed tiles are glazed with smooth patterns and colorful patterns, such as monochrome, print and high-grade art patterns. Glazed tiles have the characteristics of no pollution, corrosion resistance and easy cleaning, so they are mostly used in kitchens and bathrooms. Glazed brick
Interior wall brick-ceramic piece series-Butterfly flower has high water absorption rate (the national regulation has a water absorption rate of less than 21%). After the water body expands and swells, the surface glaze with small moisture absorption and expansion is under tension, long-term freeze-thaw, Peeling and peeling occurs, so it cannot be used outdoors.

2. Colored glazed ceramic wall tiles.

Referred to as glazed tiles, the surface is decorated with beautiful glaze and patterns. The state stipulates that the water absorption rate of such products is not more than 10%, because the fine ceramic body has small moisture absorption expansion and can be well combined with the glaze surface, so the strength is high, and it can be used for the ground or the wall surface.

Ceramic cuff tiles are mostly rectangular in shape and can be erected when used to increase the visual height after decoration. Available in various sizes, such as 60 mm × 240 mm, 100 mm × 200 mm, 115 mm × 240 mm, 150 mm × 200 mm, 150 mm × 225 mm, 200 mm × 300 mm, and the thickness is between 6 and 10 mm. Can be selected as needed.

The second is the whole body wall brick
The texture is hard, the impact resistance is good, anti-aging, no fading, but mostly single color, mainly used for the decoration of the balcony wall.

Also known as homogenous bricks, whole body bricks, and vitrified bricks. The brick has a high sintering temperature and a good degree of porcelain. The water absorption rate is less than 0.5%, and the moisture absorption expansion is extremely small, so the brick has high bending strength, abrasion resistance, acid and alkali resistance, no discoloration, and long service life. There were no visible defects in the freeze-thaw cycle at -15 ° C to 20 ° C for 20 times.

The whole wall bricks are mostly long strips, which should be pasted horizontally when used, giving people a sense of stability and solidity. There are 45 mm X95 mm, 45 mm × 195 mm, 50 mm × 100 mm, 50 mm × 150 mm, 50 mm. X200 mm, 60 mm × 240 mm and other specifications, the thickness is generally 6 ~ 8 mm, can be selected according to needs.

Global hardware network

Concerned about surprises

Label: What are the characteristics and types of wall tiles?

Previous: How to choose the most suitable sliding door Next: Choose quality hardware for your kitchen

Ningbo Actmix produces and supplies the slab form of Pre-dispersed rubber chemicals. It is convenient for feeding on open mills, and do not fall to the ground. It is filtered during production process, with same performance as the granule form of Pre-dispersed rubber chemicals.

Actmix® slab-form pre-dispersed Rubber chemicals can be application to the rubber tyre, such as Actmix®TBzTD-70, Actmix®CTP-70, Actmix®TBBS-80, Actmix®HMT-80 etc.

Slab-form Rubber Chemical Masterbatch

Slab-form Rubber Chemical Masterbatch,Rubber Chemical Masterbatch,ZnO-80 Rubber Chemicals Masterbatch,Rubber Color Masterbatch

Ningbo Actmix Rubber Chemicals Co., Ltd. , http://www.actmixchemicals.com

Posted on